GroundPerformance - Garage Projects
* * * Project S13 Silvia Coupe - Built S14 SR20DET * * *
- S13 Silvia Coupe /w SR20DET ( Completed )
- S13 240sx Hatch /w KA24E-T (Completed )
- S13 240sx Vert /w KA24E-T ( In Progress )
- S13 240sx Hatch /w KA24DE-T ( In Progress )
- Eclipse Spyder 4G64-T ( In Progress )
- S13 240sx Hatch /w KA24E-T (Completed )
- S13 240sx Vert /w KA24E-T ( In Progress )
- S13 240sx Hatch /w KA24DE-T ( In Progress )
- Eclipse Spyder 4G64-T ( In Progress )
* * * Project S13 Silvia Coupe - Built S14 SR20DET * * *
Project Status: Completed
After a fender bender issue eary this year, She is now back on the road with a fresh Silvia front end and paint. Swapped over a built S14 SR20DET Kouki motor and she is now an powerful and comfortable daily driver. Car puts down 335whp and 330ftq @ 19 psi of boost on Dynapack Dyno.
Engine;- Built S14 SR20DET.
- Greddy Metal HeadGasket.
- Greddy High Capacity Oilpan.
- ARP Hardware Head and Rods.
- CP 86.5 Pistons.
- Eagle Rods.
- Nismo Motor Mounts.
Fuel System;
- 255lph Walbro FP.
- Denso 550cc injectors.
- Stock FPR.
- Inline Fuel Pressure Gauge.
Turbo System;
- Greddy T517z Turbo.
- Stock Turbo Manifold /w Heat Shield.
- CX Racing FMIC Kit.
- DSM 1G Crushed BOV.
Tuning;
- Nistune
- Z32 MAF
Ignition;
- NGK BKR7EIX ( 2 step colder ) Gapped to .32
Exhaust;
- Ebay N1 Style 3" catback.
- Ebay 3" Front pipe.
Suspension;
- Tokico Shocks.
- Tein S-Tech Springs.
- 5-Zigen FN01RC 17" wheels.
- Yokohama Tires.
Drivetrain;
- 1 piece Aluminum driveshaft
- S13 JDM VLSD
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
* * * Project S13 240sx Hatch - KA24E-T * * *
Project Status: Completed & Sold
Built this setup from a customers S13 Shell and KA24E in barter for an engine swap and 5 speed conversion. This setup was put together with a minimal budget without sacrificing critical parts. She manages to put down 215whp / 235ftq @ 10psi on DynoDynamics dyno.
Engine; Stock KA24E
- Fully stock KA24E.
- Removed all Emission components.
- EGR Block off plate.
- Butterflies removed and plugged.
- New intake manifold gasket.
Fuel System;
- Upgraded Fuel Pump.
- CA18 Top feed 370cc injectors.
- Wired inline resistors for low impedance.
- Stock FPR.
- Inline Fuel Pressure Gauge.
Turbo System;
- Gladman Performance T3 Turbo Manifold.
- Z31 T3 Turbo.
- Ebay Oil feed and return line.
- Turbo outlet cut and custom downpipe using V-Band flange.
- CX Racing FMIC Kit for SR. Modified to fit.
Tuning;
- Socketed stock SOHC ECU
- ROM tuned according to specs.
- Stock KA24E MAF.
- Misc Gauges.
Ignition;
- NGK BKR7E ( 2 step colder ) Gapped to .32
- MSD Blaster SS coil.
- Local autostore new Wireset, Cap and rotor.
Exhaust;
- Ebay N1 Style 3" catback.
- Custom front pipe with V-Band.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
